NOT JUST FOR JOB SITES. EVERY HOME NEEDS ONE.
There is always something loose around the house: a sagging fence, a hose that keeps slipping, a tangle of cords, a coop door that won't stay shut. One kit handles them all. Stainless steel ties and a gun that tightens and cuts in one motion turn “I'll get to it this weekend” into “done.” Stainless steel resists rust, so what you fix stays fixed through sun, rain and frost.
- Fences and gates
- Hoses and irrigation lines
- Cords and cable runs
- Garden, farm and greenhouse
- Garage, car and boat repairs
- Chicken coops and rabbit hutches
Keep a Pro Kit in the garage and you're ready for whatever breaks next.
HOLDS UP TO 200 LBS. THEN STAYS PUT.
A load that shifts, a cable that sags, a gate that drifts. It usually starts with a fastener that gives up. Each stainless steel tie supports up to 200 lbs of tensile strength, so the fastening holds when the job gets heavy. Wrap an exhaust, bundle a heavy cable run or close a farm gate once, and you won't be back to redo it.
- Ties up to 11.8 in long
- Won't break or loosen under heavy loads
- Made for automotive, industrial and structural jobs
Grab the Pro Kit above and fasten it right, once.
304 STAINLESS STEEL. BUILT TO OUTLAST.
Plastic ties crack in the sun and snap in the cold. These 150 ties are premium 304 stainless steel, so rust, corrosion, saltwater, chemicals, UV and extreme temperatures don't wear them down. Fasten a fence, an exhaust or a greenhouse once, and it stays fastened.
- Rust and corrosion resistant
- UV, heat and cold resistant
- Saltwater and chemical resistant
TIGHTEN AND CUT. ONE MOTION, EVERY TIME.
Twisting stainless ties tight with a pair of pliers is slow, and the cut end can leave a sharp edge that catches your skin or your sleeve. The cable tie gun included in every kit tightens and cuts in one squeeze, so each tie lands at the same consistent tension and finishes with a flush, snag-free cut. Wear the included gloves when you tighten and cut: stainless steel holds an edge, so gloves keep your grip steady and your hands protected.
- Included free with every kit
- Tightens and cuts in one motion
- Flush cut leaves no sharp tag ends
- Wear the included gloves for a safe, steady grip
TIGHTENS ONCE. LOCKS FOR GOOD.
A tie that slips back loose after the first bump undoes the job before you've even finished it. Each stainless steel tie locks the moment it's pulled through: a ratcheting head grips the band and only lets it move one way, so there's no separate step and nothing to slip back. Once it's tightened, it stays tightened — through wind, vibration and weather, with no re-checking and no redoing.
- Locks automatically as you tighten, no extra step
- Ratchet head only moves one way, so it can't loosen or slip back
- Holds firm through vibration, wind and weather
KEY FEATURES. ONE KIT, EVERY JOB.
A cluttered toolbox slows you down when something needs fixing now. This kit is built to grab, use and put away in seconds.
- Ergonomic, compact design: a comfortable grip that reduces hand fatigue, small enough to fit a toolbox drawer or glovebox
- Versatile use: one kit for fences, pipes, cables, automotive and construction jobs
- Safe, non-toxic materials: safe for household use, not just the jobsite
What Makes GRIPSTEELPRO the #1 Stainless Steel Zip Tie Tool Kit
Built for the Real Problem
Plastic ties crack in the sun and snap in the cold. 304 stainless steel shrugs off rust, UV and extreme temperatures.
Tightens and Cuts in One Motion
The included gun pulls every tie to the same tension and cuts it flush in a single squeeze.
Locks Once, Holds for Good
The ratcheting head only moves one way, so ties never slip back through vibration, wind or weather.
Fixed in Seconds, Not Weekends
Load, squeeze, done. One-hand operation anyone can use, no extra tools needed.
Safer and More Affordable
Flush cuts leave no sharp edges, gloves are included, and one kit replaces a drawer full of tools.
Holds Up to 200 lbs
Each 11.8-inch tie takes up to 200 lbs of tensile strength, ready for automotive, structural and farm jobs.
8 Reasons You'll Be Glad You Chose It
- No sore hands — the gun does the squeezing, not your fingers
- No cut fingers either — flush cuts and included gloves tame sharp steel edges
- Holds what plastic can't — from farm gates to 300-lb escape artists
- Every tie looks pro — same tension, same clean finish, every time
- Pennies per fix — stop re-buying $7 hardware-store patch kits
- Anyone can use it — one hand, no skills, no manual
- Built to be kept — organizer and bag keep all 6 pieces together
- 90-Day "Results or Full Refund" Guarantee — we stand behind every kit
Self-Locking Head
One-Motion Cut
Consistent Tension
Comfort Grip
Real Specs, Real Strength
No made-up survey numbers here. Just the four figures that matter when a fastener has to hold — measured, printed, guaranteed.
lbs of tensile strength — locked into every single stainless tie
food-grade stainless steel — shrugs off rust, salt, UV, heat and frost
steel ties in every kit — plus refill packs from 100 to 1000 pcs
squeeze to tighten and cut — flush finish with no sharp tag ends
Pro Kit
pliers
ties
Why Choose Us?
Don't fall for ties that snap in the sun.
How the GRIPSTEELPRO Pro Kit compares:
Shop With Total Confidence
90-Day Money Back
Not satisfied? We refund every penny — no questions, no hassle.
Fast & Free Shipping
Free shipping across the USA with full door-to-door tracking.
Easy Returns
Hassle-free returns and exchanges on every order.
Secure Checkout
Encrypted checkout powered by Shopify.
Upgrade Your Fastening Work with Ease.
Loose Fence? Fixed in Minutes
Loop a stainless steel tie through the wire and around the post, squeeze to cinch it tight, pull the lever to cut the tail — done. One tool tightens and cuts, and the fence stays fixed through sun, rain and frost. Stop re-tying plastic that snaps every season.
One Kit for Every Garden Job
Trellises, stakes, fence lines, even the chicken coop — wrap a steel tie, squeeze to tighten, pull once to snip the tail. The ties and the tool come in one kit, ready to go. Tie it once in spring, forget it till next year — no more redoing cheap plastic every season.
Built for Garage Heat
Hoses, heat shields, exhaust parts — steel ties handle engine heat where plastic turns brittle. Loop it, pump the handles to lock it tight, pull the lever for a clean flush cut. And the release tool in the kit pops a tie open, so one tie can work more than once.
Is this tool easy to use?
Yes, it’s designed for simple one-hand operation, making it easy for both beginners and professionals to use without any complicated setup.
Is it suitable for heavy-duty use?
Absolutely, it’s built to handle strong metal cable ties and performs reliably in demanding industrial and outdoor applications.
Can I use it in tight spaces?
Yes, the compact and lightweight design allows you to work comfortably in narrow or hard-to-reach areas.
Will it reduce hand fatigue?
Yes, the ergonomic grip is designed to reduce strain, making it comfortable to use even during long working sessions.
What materials does it work with?
It works best with stainless steel cable ties, especially for heavy-duty fastening tasks that require strength and durability.
Is it suitable for DIY and professional use?
Definitely, it’s a versatile tool ideal for home repairs, workshops, construction sites, and professional installations.
